Order HTS Ultra-Rack - Hand Truck Sentry System® HTS Systems

HTS SYSTEMS ORDER FORM

Make the right choice! Take your fleet into a new direction where the road is much safer, your drivers and cargo better protected, while you're saving green in your wallet and in our environment! Welcome to HTS Systems Lock N Roll, LLC. Hand Truck Transport Solutions After years of refinement, the new HTS Ultra-Rack is finally here!! The Hand Truck Sentry System streamlines the process of loading, unloading and storing a hand truck aboard commercial delivery vehicles. Saving a driver a minute or more during each delivery stop X 30 stops per day = a labor cost savings of 2.5 hours per week! Any delivery driver who rushes back off-route in a hurry to retrieve their forgotten hand truck is no longer a safe driver, they instantly become a liability! Unmatched safety, rock solid design and the latest built-in ergonomics makes the new HTS Ultra-Rack a must-have! Remember your hand truck every time! Save Time, Fuel and Money! We may be new... but we have earned the approval of company owners, fleet managers and route driver from across the country! Just call and ask any of our HTS Ultra-Rack customers! Contact your nearest Hackney Beverage Body or Kidron Refrigerated Truck Body representative for pricing and installation locations. The HTS can solve all of your hand truck problems on route. Your hand truck is always ready when you need it and out of your way when you don't. The HTS Ultra-Rack was designed to deliver. It's Here!... the new HTS-20S Swing Mount is designed for commercial delivery vans! Equip your Sprinter Vans and Ford Commercial vans with the rear mounting HTS-20S Ultra-Rack. The HTS-20S is faster, easier and safer than inside storage and loading. Increase your Ford or Sprinter van payload capacity, reduce delivery time and freight damage, order today! Start increasing your driver's route productivity, reduce delivery time and your monthly fuel expenses! Order the powered HTS Ultra-Rack System for your route trucks today! Please contact our HTS Systems' customer service center so we may direct you to a Hand Truck Sentry System (HTS) distributor within your local area. We apologize for any delays with your orders, the market demand for the HTS Ultra-Rack has surpassed our vendor lead times. We will process your orders as quickly as possible and appreciate your patience. Material Handling and Truck Accessory Distributors welcome, please contact our Scranton facility for HTS volume pricing and marketing material available to qualified distributors. Limited distributorships available, for more information call toll free: 1-866 388-2102. THE HAND TRUCK SENTRY SYSTEM IS THE ROUTE DISTRIBUTION HAND TRUCK TRANSPORT SOLUTION!!

Where and how a route driver transports a hand truck aboard a vehicle can make a huge impact on worker safety, route productivity and profitability.

Order the HTS with a customized B&P Liberator hand truck as apart of your new vehicle options list. You can now incorporate both into your lease plan.

Effective August 2009, HTS Systems has been able to reduce production and assembly costs and pass the savings directly to our distributors and their

customers. Recently three of our main component suppliers have offered us exceptional volume pricing and with our new assembly operations, it now

allows us to offer you the best HTS Ultra-Rack pricing ever! Now it's even more affordable to outfit more route trucks or delivery vans in your company

fleet. Contact your local HTS Systems' distributor for more information on how to place your HTS Ultra-Rack order today!

HTS-10T Tilt Mount $ 539.00 HTS-20S Swing Mount $ 849.00 HTS-30D Direct Mount $ 539.00 HTS-30DI Interior Mount $ 375.00

Effective August 2009, HTS Systems has been able to reduce production and assembly costs and pass the savings directly to our distributors and their customers. Recently three of our main

component suppliers have offered us exceptional volume pricing and with our new assembly operations, it now allows us to offer you the best HTS Ultra-Rack pricing ever! Now it's more affordable

to outfit all your route trucks and delivery vans in your company fleet. As always, our HTS Systems' product safety, reliability and quality control will never be substituted for price.

We hope with the present state of our economy that we can continue offering these outstanding new lower prices! Take advantage of the ultimate OEM and Aftermarket truck body and material

handling equipment for hand trucks! Contact your local HTS Systems' distributor for more information on how to place your HTS Ultra-Rack order today!

Effective April 3, 2009 all orders must be processed through your local HTS Systems distributor.

Direct sales can only be processed if an HTS Systems distributor has not been established in your area.

What information is provided by you to help our HTS distributors process your HTS order? It's simple!

Just answer six (6) easy questions and you’re ready to place your order! Contact your regional HTS distributor or our office for help.

1. What type of delivery vehicle are you installing your new HTS unit on?

Beverage Body side-loader, Box Van, Sprinter Van, Armored Car, etc.? Vehicle (chassis) manufacturer, body manufacturer, model and year.

2. Where would you like to install your new HTS unit on your delivery vehicle?

Front of vehicle installations use (Tilt Mount) HTS-10T Rear of vehicle installations use (Direct Mount) HTS-30D or (HTS-20S Swing Mount)

3. What type of fuses or electrical fuse box does your vehicle use? Is your new truck designed with a Multiplex wiring system?

ATO-Standard fuses or the (newer) ATM-Mini fuses

ATO-Standard fuse /ATM-Mini fuse HTS Standard and Mini fuse Add-A-Circuit

4. What is the length of your vehicle body? (Rear Mounts only)

Some rear installations may require a Micro-cable extension harness. Vehicles with 8-12 Beverage Bay, Step Vans, Sprinter Vans or larger

commercial vans usually require a 20’ft. 30’ft. or 40’ft. Micro-cable extension. Front mount HTS installations do not require an extension harness.

5. Is the mounting surface area of the vehicle bumper vertically straight and flat?

Some vehicle bumpers (front and rear) are designed with contours or air vent openings stamped into the front surface area of the bumper.

This may require an HTS adapter plate or our free HTS shim kit to properly mount the HTS unit.

6. If you do require an HTS metal adapter plate, are you bolting or welding?

Simply match the adapter plate (metal alloy) to the vehicle bumper alloy. Select the steel plate for steel bumpers or the aluminum plate for

aluminum bumpers. Both HTS bumper adapter plates come pre-punched, vented and ready to bolt or weld.

Please have your vehicle (chassis) information, shipping address and credit card readily available when contacting your HTS Systems distributor.

All truck chassis models must be properly identified when ordering to include the proper spacers and stainless steel fasteners with the HTS

adapter plate installation kit.

Navistar – DuraStar and TranStar chassis models require the: AP-01 standard adapter plate

Navistar – DuraStar Non-CDL low profile chassis or with low profile tires requires the: APH-03 high position adapter plate

Navistar – CityStar cab-over chassis requires the: APH-04 high position adapter plate

Navistar – 4700 Series or older (late model chassis) requires no HTS adapter plate (HTS shim kit provided)

Freightliner M2 chassis models (all business class models) require the: AP-01 standard adapter plate

Freightliner M2 chassis (business class) with recessed axle (low bumper) requires the: APH-03 high position adapter plate

Kenworth - T300 - T600 tractor chassis models require the: AP-02 Kenworth adapter plate (mounts behind the front bumper)

Peterbilt conventional models 325 - 330 - 335 chassis models require the: AP-01 standard adapter plate

Peterbilt cab-over 210 - 220 chassis models require the: APH-04 high position adapter plate

Sterling Acterra class 5-8 chassis models require the: AP-01 standard adapter plate

Sterling 360 cab-over chassis models require the: APH-04 high position adapter plate

Sterling Bullet chassis models requires the: AP-01 standard adapter plate

Ford pick-up truck chassis F250 F350 models require the: AP-01 standard adapter plate

Chevy pick-up truck chassis (Chevrolet Silverado and Colorado) models require the: AP-01 standard adapter plate

Mack cab-over (late model chassis) requires no HTS adapter plate

Mack cab-over chassis Freedom XL XXL models require the: APH-04 high position adapter plate (Freedom L is not compatible)

Mack conventional chassis (Freedom model) requires the: AP-01 standard adapter plate

GMC Top Kick chassis (C Series model) and GMC Top Kick tractor requires the: AP-01 standard adapter plate

GMC cab-over chassis (T Series model) requires the: APH-04 high position adapter plate

GMC cab-over chassis (W Series model) requires the: APH-03 high position adapter plate

GMC 3500 cab-over chassis model requires the: APH-03 high position adapter plate

GMC pick-up truck chassis Sierra 2500HD 3500HD models require the: AP-01 standard adapter plate

Hino Truck conventional chassis models 145-165-185 -238-258ALP-258LP-268-268A-338-338CT require the: APH-03 high position adapter plate

Isuzu Truck cab-over chassis N series model requires the: APH-03 high position adapter plate

Isuzu Truck cab-over chassis F series model requires the: APH-04 high position adapter plate

UD Nissan cab-over chassis models 1400 1800 1800CS 1800HD 2000 2300 2300DH 2300LP 2600 3300 require the: APH-04 high position adapter plate

Volvo cab-over chassis FE and FL models require the: APH-04 high position adapter plate

Standard HTS units are Black. Custom colors are available upon special request, a fifty (50) unit quantity order is required.
Please note: Most HTS-30D Direct Mount (rear installations) require a 20ft. or 30ft. Micro-Cable extension harness.

                     Inform your distributor or sales person of the total length of your side-loader body beverage truck.
                     4-6 Bay 134” 20’ft.              8-10 Bay 136”-224” 30’ft.              10-12 Bay 238”-297” 40’ft.

Remote Keyless Entry System and Ignition Interrupt Kits may be ordered and/or purchased separately.
The HTS-10T and HTS-30D units require a flat, vertical mounting surface.

Model

Description

Weight

List Price

Retail Price

Add To Cart

HTS-10T HTS Tilt Mount Ultra-Rack / front system 23 lbs. (10.4 kg) $589.00 $539.00

HTS-20S HTS Swing Mount / rear van system 34 lbs. (15.4 kg) $889.00 $849.00

HTS-30D HTS Direct Mount Ultra-Rack / rear system 28 lbs. (9.0 kg) $589.00 $539.00

HTS-AP Universal Adapter Plate 8 lbs. $55.00 $50.00

CS-Color Color Select Option -- $35.00 $25.00 25 unit minimum

MC-4020 20' foot Micro-Cable Extension 8.0 oz. (0.24 kg) $40.00 $30.00

MC-4030 30' foot Micro-Cable Extension 8.4 oz. (0.24 kg) $45.00 $35.00

MC-5040 40' foot Micro-Cable Extension 8.8 oz (0.25 kg) $50.00 $40.00

EW-80 2 Year Extended Warranty -- $25.00 $25.00





The HTS Ultra-Rack shipping carton dimensions are 34" X 24" X 7" and weigh approximately 35 lbs. or 40 lbs. with the HTS adapter plate.

The HTS-20S Swing Mount Ultra-Rack is shipped in two separate cartons. The second photo shows the lower sub-assembly attachment.

The HTS Ultra-Rack is compatible with most standard and convertible commercial hand trucks. Pallet orders ready for freight shipping.

HTS Systems ships orders of all sizes, (1) unit to (100) units.      The HTS is compatible standard and convertible commercial hand trucks.



HTS-20S-TD Taylor-Dunn vehicle HTS Ultra-Rack units.   HTS pallet (6) order ready for Con-Way Freight pick-up at JCM Manufacturing.

HTS-10T Tilt Mount Ultra-Rack units ready for UPS Ground shipping.       HTS-10T Ultra-Rack pallets ready for common carrier shipping.

FedEx Express and FedEx Ground also ship our HTS equipment to customers. HTS FedEx Express pick-up for Johnson Refrigerated Bodies.

All shipments are FOB Scranton PA USA unless instructed, we reserve the right to package and ship your order in the most economical way. Orders of 1-10 units will be shipped by FedEx, UPS or DHL. Orders ten (10) units or more may be palletized and shipped by LTL common carrier, Yellow Freight, Roadway or Ward Trucking. Please allow 6-8 weeks for delivery. Special custom orders or high volume orders may take longer; please consult your local HTS Systems distributor or regional sales representative for additional information. Please make out all checks or money orders to HTS Systems

Lock N Roll, LLC. and mail with completed order form to the address provided below. For faster order processing and shipping we take most credit cards by phone. Please have your order specifications ready before calling, Thank you.

UPS Ground shipment for fleet customers in the Midwest often deliver in 3-5 days. Orders 1-10 units ship parcel, 10-15 common carrier.

Please contact our customer service center at: (570) 342-2102 between the hours of 9:am and 5:pm EST, Monday thru Friday. To contact our corporate offices please call toll free:1-866 388-2102, between 9:am and 5:pm EST, Monday thru Friday. Material Handling and Truck Accessory Distributors welcome, please contact our Scranton facility for HTS volume pricing and marketing material available to qualified distributors. Complete customer satisfaction is our goal, however in the event of heavy call volume, please leave your name, company name and phone number and we will return your call within 24hrs.Thank you for trusting HTS Systems Lock N Roll, LLC. to solve your Hand Truck Transportation and Safety needs.



You may order our products online by downloading our HTS Systems Order Form, printing and faxing your order information to your nearest HTS Systems distributor at (570) 347-3878.

We will forward all contact and order information to your states regional HTS Systems distributor.

If you don't have Adobe Reader 11.0, download it by clicking below.



Please have your vehicle information, shipping address and credit card readily available when contacting your HTS distributor by phone. Effective April 3, 2007 all orders must be processed through your local HTS Systems distributor. Direct sales can only be processed if an HTS distributor has not been established in your area.



For approved direct sales only, please write all checks or money orders to: HTS Systems Lock N Roll, LLC. and mail with your completed order form to the address provided below. For faster order processing and shipping we take most major credit cards by phone. Please have your order specifications ready before calling. We can help you select the right HTS model for your route vehicles and we are currently establishing a distributor network to your region. Our new dealer list will help provide you with information for sales, discounts and customer service in your state.

             HTS Systems Distributor Locator Page and Web Site Links coming soon!